Tool Kits and Tool Cases for Field Service Technicians
Tecra Tools - Tool Kit logo
Toll Free Phone Number 800-284-0808
Image for Shopping Cart


32820.jpg
Click for a larger view

Fiber Optics Test Equipment

AFL / Fujikura FSM-70S Fusion Splicer Kit

The FSM-70S Fusion Splicer is the fastest and most rugged core-alignment fusion splicer in the market today! New design now boasts an amazing 21-second total splice time while still resisting shock, dust, rain, and can even withstand a 30 drop test.


The FSM-70S (improved replacement for the previous FSM-60S Model) from AFL splices a fiber in 7 seconds and heats a 60mm splice sleeve in 14 seconds. That's ONLY 21 seconds total!

Other great new features, such as a fully programmable automated wind protector, auto open and closing of the sheath clamps, faster automatic "clam shell design" tube heater operation, user-selectable clamping method, automated monitor image orientation, severe impact resistant display, new mirror-less optical system, and increased battery life to splice and shrink 200 splices per charge, improves splicing speed, operator efficiency and reliability.

New software provides the ability to download splice data to a PC for splice data reporting, you can also download splicer operating software via the internet to maintain peak performance, and pre-installed training videos included with the fusion splicer enhances and speeds training and technical support.

Package includes: CT30A Cleaver, BTR-09 Li-Ion Battery, AC Adapter, AC Cord, Spare Electrodes (pair), Sheath Clamp, Alcohol Dispenser, Screwdriver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual, USB cable and Transit Case with Carrying Strap.

  • Very fast 21-second total splice time
  • Rugged mirror-less construction delivers excellent shock, dust and moisture resistance
  • Dual monitor position with automatic image orientation
  • Even better 5mm cleave length easily supports splice on connectors or small package needs
  • Automatic arc calibration
  • User-selectable fiber clamping method sheath clamp or fiber holders
  • Auto-start tube heater
  • Impact-Resistant Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
  • Simultaneous battery charge and splicer operation
  • Long life battery (up to 200 splice/heat cycles per charge)
  • Detachable work table incorporated into the transit case
  • Pre-Installed training and support videos
  • Software upgrades via the internet
  • Green friendly RoHS & WEEE compliant
Specifications 
Model FSM-70S Fusion Splicer
Applicable Fibers Single-mode (ITU-T G.652 & G.657), Multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
Cladding Diameter 125μm
Coating Diameter 100μm to 1,000μm
Fiber Cleave Length 5mm to 16mm
Typical Average Splice Loss 0.05dB with SM, 0.02dB with M , 0.08dB with DS, 0.08dB with NZDS
 Measured by cut-back method relevant to ITU-T and IEC standards
Splicing Time SM Fast Mode - 7 seconds; SM Auto Mode - 12 seconds; Auto Mode - 15 seconds
Arc Calibration Method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core alignment data
Storage of Splice Result Last 2,000 results to be stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification 320X for single X or Y view, or 200X for X and Y view
Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor
Operating Condition 0 to 3,660m above sea level, 0 to 95%RH and -10 to 50C respectively
Mechanical Proof Test 1.96 to 2.25N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves
Protection Sleeve Length60mm, 40mm, micro
Splice/Heat Cycles with Battery Typical 200 cycles with power save functions activated
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery
Terminals USB 1.1 (USB-B type) for PC communication. M ini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection Maximum wind velocity of 15m/s. (34 mph)
Dimensions 146 W x 159 D x 150 H (mm) / 5.75" W x 6.25" D x 5.9" H
Weight 2.3 kg (5.5 lbs) with AC adapter ADC-18; 2.5kg (5.95 lbs) with BTR-09 Li-Ion battery
32820.jpg
AFL / Fujikura FSM-70S Fusion Splicer Kit
$14,225.00
Item #: 32820
Dimensions:
Weight: 20 lbs.
Quantity:

Last Update: 14th December 2017
Contact 800-284-0808 Government Buyers Catalog Request Custom Tool Kits About Us Tec-Alert Newsletter Blog Catalog Request Custom Tool Kits Contact Us Order Tracking