32820.jpg
Click for a larger view

Fiber Optics Test Equipment

AFL / Fujikura FSM-60S Fusion Splicer Kit

The FSM-60S Fusion Splicer is the most rugged core-alignment fusion splicer in the market today! It can resist shock, dust, rain, and can even withstand a 30” drop test


The FSM-60S splices a fiber in 9 seconds and heats a 60mm splice sleeve in 30 seconds. New features, such as automatic tube heater operation, user-selectable clamping method, automated monitor image orientation, and battery charge capability during splicer operation proves reliability.

New software provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.

Package includes: CT30A Cleaver, ADC-13 AC Adapter, ACC-14 AC Cord, Spare Electrodes (pair), Sheath Clamp, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual, JP-05 Splice Sleeve Cooling Tray, USB cable and Transit Case with Carrying Strap.

  • Rugged construction providing shock, dust and moisture resistance
  • Dual monitor position with automatic image orientation
  • Automatic arc calibration
  • User-selectable fiber clamping method – sheath clamp or fiber holders
  • Auto-start tube heater
  • Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
  • Simultaneous battery charge and splicer operation
  • Long life battery (up to 150 splice/heat cycles per charge)
  • Detachable work table incorporated into the transit case
  • Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
  • Green friendly – RoHS & WEEE compliant
Specifications 
Model FSM-60S Fusion Splicer
Applicable Fibers Single-mode (ITU-T G.652), Multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
Cladding Diameter 80μm to150μm
Coating Diameter 100μm to 1,000μm
Fiber Cleave Length 8 to 16mm with 250μm coating diameter, 16mm with 900μm coating diameter
Typical Average Splice Loss 0.02dB with SM, 0.01dB with M , 0.04dB with DS, 0.04dB with NZDS
 Measured by cut-back method relevant to ITU-T and IEC standards
Splicing Time Typical 9 seconds with standard single-mode fiber
Arc Calibration Method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core alignment data
Storage of Splice Result Last 2000 results to be stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification 300X for single X or Y view, or 187X for X and Y view
Viewing M ethod Dual cameras with 4.1 inch TFT color LCD monitor
Operating Condition 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively
Mechanical Proof Test 1.96 to 2.25N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length60mm, 40mm, micro
Splice/Heat Cycles with Battery Typical 160 cycles with power save functions activated
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
Terminals USB 1.1 (USB-B type) for PC communication. M ini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection Maximum wind velocity of 15m/s. (34 mph)
Dimensions 136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
Weight 2.3 kg (5.1 lbs) with AC adapter ADC-11; 2.7kg (5.9 lbs) with BTR-08 battery
32820.jpg
AFL / Fujikura FSM-60S Fusion Splicer Kit
$14,225.00
Item #: 32820
Dimensions:
Weight: 20 lbs.
Quantity: