Fluke MicroScanner2

Streamlined voice/data/video cable and service testing.

The MicroScanner2 displays key test results – wiremap, pair lengths, distance to fault, cable ID, and far end device – all on one screen, unlike older models that required four separate tests. It features an oversized, backlit LCD screen with the power to display wiremap results graphically. Easy to read in a dark closet or in direct sunlight. Integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing.

You can rule out a whole host of potential cable and service issues before determining the cause of a connection problem. Is there telephone voltage? What’s the polarity? Is there an Ethernet switch at the far end? Is PoE available? MicroScanner2 acknowledges this, giving you the ability to verify the most common voice, data, and video services. That means faster, more comprehensive troubleshooting.

Revolutionary Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
Multimedia Support – Tests all common media types including RJ11, RJ45, Coax, with no need for adapters
IntelliTone Toning – Locates virtually any cable or wire pair with IntelliTone digital and analog toning
VDV Service Detection – Verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE
Rugged Housing – Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs
Oversized Display – Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet

• Test Connectors - Twisted-pair: UTP, FTP, SSTP 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs; Coax: F-connector for 75Ω, 50Ω, 93Ω cables

• Cable Tests - Length (460 m or 1500 ft. with resolution to 0.3 m or 1 ft.), wiremap to TIA-568A/B standards, remote ID locators; displays results on one screen

• Tone Generator - IntelliTone digital tone: [500 KHz]; analog tones: [400Hz, 1KHz]

• PoE Detection - Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices

• Ethernet Port Test - Advertised speed of 802.3 Ethernet ports (10/100/1000)

• Power Source - Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries; Battery life: 20 hours of typical use; Other compatible battery types: 2 AA photo lithium, NIMH, NICAD

• Dimensions - 3 in x 6.4” x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)

• Weight - 0.8 lbs. (363 grams)

• Display - Monochrome liquid crystal display (LCD) with backlight

• Warranty - One year

Datacom Test Equipment

Fluke MicroScanner2

Streamlined voice/data/video cable and service testing.